RAM upgrades

Archived 2013-12-08
This page has been archived and some links may not work correctly anymore. No updates of this page will be done anymore.

This article is related to the Palmtops HP 100LX, 200LX and 1000CX. The OmniGo 700LX and the 95LX cannot be upgraded that way.

See also: Tutorial: Disassembly of a 200LX


If you are interested in a RAM upgrade for your HP Palmtop, have a look at my HP Palmtop products page or contact me.

There are pages excellently describing do-it-yourself memory upgrades for the 200LX some of them without the need of a daughterboard:

For all upgrades involving a daughterboard, i.e. a RAM expansion module, you need a daughterboard socket (connector) on the motherboard. Some motherboards don´t have this socket, some do. 4MB 200LXs and 2MB 100LXs always have one. All 200LXs which don't have one installed have at least the soldering pads for such a connector. Here is the datasheet of the needed connector. You can buy such a connector from Thaddeus or Rundel. These models can be upgraded with a daughterboard: 100LX 2MB model, 200LX all models, 1000CX all models.

This is a 4MB upgrade daughterboard by Times2Tech which upgrades a palmtop with 1 MB on-board memory to 5 MB, a 2MB motherboard to 6 MB. This board is simply plugged into the RAM socket, no additional wires are needed:

 

This is an 8MB upgrade daughterboard by Times2Tech which upgrades every kind of basic configuration to 8 MB, because the on-board RAM is removed entirely:

 

This is a 32MB upgrade daughterboard by Times2Tech:

 

The following pictures show the additional wires which are necessary for the 32MB memory upgrade. Some pins of the CPU chip have to be removed from the mainboard and wires have to be attached to them. These are pins 24 and 25 from the right on the pin row which faces the battery compartment. The wires lead directly onto the memory upgrade board. Pin 24 (the right one) leads to the pad labeled "A1" of the Times2Tech 32MB upgrade board and pin 25 (the left one) needs to be connected to pad labeled "A10".
This is a very tricky job and not recommended to be done by people who are not experts!

 

 

The pictures below show the 64MB upgrade board. 3 additional address lines must be connected to the CPU for that kind of upgrade. The daughter board is much larger than the boards of the 32MB and smaller upgrades. There are also 64MB upgrades which have the same small daughterboard size as the other upgrades. Klick on an image to view a larger one with more details.

 

Do you like to support me?

Dear fellow Palmtopper!

If you like, you may reward me for the work I put into this website with a donation.

 

For a donation in US$:

For a donation in €:

Your donation, even if it's just a single USD, will help me to:

  • finance the server that hosts the site
  • justify time I spend with maintaining the site and do not spend with earning money otherwise (wife is watching! ;D)
  • just continue to be motivated :)

Since my company "hermocom" does not exist for many years anymore, I am now spending my spare time and private money for all of this. Thank you very much! 🙂

Yours truly,
Daniel Hertrich